|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Adjustable Rear Control Arms
Applications: Mitsubishi Evolution X 2008+
Torque Solution Adjustable Rear Control Arms Kit is designed to correct the rear suspension geometry on your lowered Evolution X 2008+. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car or get the full life of your tires these are a must have!!
2 links Total Included in Each Package. Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups.
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-FK Rod Ends
-Limited Lifetime Warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Adjustable Rear Control Arms
Applications: Mitsubishi Evolution X 2008+
Torque Solution Adjustable Rear Control Arms Kit is designed to correct the rear suspension geometry on your lowered Evolution X 2008+. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car or get the full life of your tires these are a must have!!
2 links Total Included in Each Package. Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups.
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-FK Rod Ends
-Limited Lifetime Warranty
|
Torque Solution Billet Ride Height Bracket
Applications: Toyota GR Supra MKV A90 A91
Torque Solution Billet Ride Height Bracket for the Toyota GR Supra MKV A90 A91 is a great simple peace of mind upgrade to ensure you never break or have a broken bracket again after having your car strapped to a dyno. Simple to install by simply removing the OEM bracket and installing our billet bracket in its place.
- CNC 6061-T6 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Limited Lifetime Warranty
|
Torque Solution Adjustable Rear Control Arms
Applications: Mitsubishi Evolution 7/8/9
Torque Solution Adjustable Rear Control Arms are designed to correct the rear suspension geometry on your lowered Evolution 7/8/9. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car for the optimal contact patch or get the full life of your tires these are a must have!!
Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups.
- Made out of 7075 Billet Aluminum
- Weighs 3lbs 4oz Per Arm (3.25 lbs) (6.5lbs Per Set)
- Black anodized / Torque Solution Laser engraved
- 85A Durometer Urethane Bushings
- Nickel Plated 4130 Chromoly Adjuster
- High Quality Teflon Lined Spherical Bearing FK Rod Ends
- Stainless Steel Hardware
- Sold As A Pair
- Limited Lifetime Warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Adjustable Rear Control Arms
Applications: Mitsubishi Evolution X 2008+
Torque Solution Adjustable Rear Control Arms Kit is designed to correct the rear suspension geometry on your lowered Evolution X 2008+. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car or get the full life of your tires these are a must have!!
2 links Total Included in Each Package. Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups.
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-FK Rod Ends
-Limited Lifetime Warranty
|
Torque Solution Billet Front Lower Control Arm Inserts
Applications: Tesla Model 3 / Y
All Torque Solution billet inserts are made from high grade billet 6061-T6 aluminum material and then black anodized for corrosion resistance. This kit was designed to reduce bushing deflection which causes toe change under braking. This results in improved driver feedback, reduction in darting and steering wheel shake during hard braking.
Fills the voids in the 2 front lower OEM rubber control arm bushings.
- 6061 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Reduces Bushing Deflection
- Improved performance
- Limited Lifetime Warranty
Includes:
- CNC Billet Aluminum Insert (4)
Fits: - Tesla Model 3 / Y RWD Base, RWD Long-Range, AWD Long-Range, AWD Performance, Dual Motor
**Professional installation recommended.PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
 WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Adjustable Front Sway Bar End Links
Applications: See Application List
Torque Solution Front Sway Bar End Links offer increased load capacity and can be used with stock or aftermarket sway bars. Also, due to the end links being adjustable you can eliminate preload on the sway bar, which can be caused by uneven suspension heights or settling. This is especially common with aftermarket suspension.
- CNC 6061 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Adjustable
- PTFE Lined Rod End w/ Custom Stud
- Limited Lifetime Warranty
Includes:
- Billet Aluminum Threaded Hex Adjuster Rod (2)
- PTFE Lined Zinc Rod End w/ 3/8-24 Stud (4)
- 3/8-24 Zinc Nyloc Flange Nut (4)
- 3/8 Zinc Flat Washer (8)
Fits:
- Ford Focus 2012+ Sedan / Hatch S SE SES Titanium ST Turbo
- Mazda Mazda 3 2004-2013 All
- Mazda Mazdaspeed 3 2007-2013
- Mazda Mazda 5 2006-2012
- Volvo C30 2004-2013
- Volvo S40 2004-2011
- Volvo C70 2006-2011
- Volvo V50 2005-2011
- BMW 740i 1995-2001
- BMW 740iL 1995-2001
- BMW 750iL 1995-2001
- BMW Z8 2000-2003
- BMW Alpina 2000-2003
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Adjustable Rear Sway Bar End Links
Applications: Toyota GR Supra MKV / BMW Z4 G29
Torque Solution Rear Sway Bar End Links for Toyota GR Supra MKV / BMW Z4 G29 offer increased load capacity and are able to be used with stock or aftermarket sway bars. Also, due to the end links being adjustable you are able to eliminate preload on sway bar, which can be caused by uneven suspension heights or settling. This is especially common with aftermarket suspension.
- CNC 6061-T6 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Adjustable
- PTFE Lined Rod End w/ Custom Studs
- Limited Lifetime Warranty
Includes:
- Billet Aluminum Threaded Hex Adjuster Rod (2)
- PTFE Lined Zinc Rod End w/ M10-1.5 Stud (4)
- M10-1.5 Zinc Nyloc Flange Nut (4)
Fits:
- Toyota GR Supra MKV 2020+ A90/A91
- BMW Z4 G29 2019+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Adjustable Rear Sway Bar End Links
Applications: Ford Focus RS 2016+ / Mustang 2015+ S550 S650 All
Torque Solution Rear Sway Bar End Links for the Ford Focus RS offer increased load capacity and are able to be used with stock or aftermarket sway bars. Also, due to the end links being adjustable you are able to eliminate preload on sway bar, which can be caused by uneven suspension heights or settling. This is especially common with aftermarket suspension.
- CNC 6061-T6 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Adjustable
- PTFE Lined Rod End w/ Custom Studs
- Limited Lifetime Warranty
Includes:
- Billet Aluminum Threaded Hex Adjuster Rod (2)
- PTFE Lined Zinc Rod End w/ M12-1.75 Stud (4)
- M12-1.75 Zinc Nyloc Flange Nut (4)
Fits:
- Ford Focus RS 2016+
- Mustang 2015-2023 S550 All Models
- Mustang 2024+ S650 All Models
- Ford Fusion 2013+
- Lincoln MKZ 2013+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Adjustable Front Sway Bar End Links
Applications: Toyota GR Supra MKV / BMW Z4 / BMW G8X / BMW G2X / BMW G42
Torque Solution Front Sway Bar End Links for Toyota GR Supra MKV / BMW Z4 / BMW G8X / BMW G2X / BMW G42 offer increased load capacity and are can be used with stock or aftermarket sway bars. Also, due to the end links being adjustable you can eliminate preload on the sway bar, which can be caused by uneven suspension heights or settling. This is especially common with aftermarket suspension. We also chose to make these out of 7075 billet aluminum as we felt due to the length needed for these links this was the best suited option. You can rest assure these are the strongest links available for these applications.
- CNC 7075 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Adjustable
- PTFE Lined Rod End w/ Custom Studs
- Limited Lifetime Warranty
Includes:
- Billet Aluminum Threaded Hex Adjuster Rod (2)
- PTFE Lined Zinc Rod End w/ M12-1.75 Stud (4)
- M12-1.75 Zinc Nyloc Flange Nut (4)
Fits:
- Toyota GR Supra MKV 2020+ A90/A91
- BMW Z4 G29 2019+
- BMW M3 M4 G8X 2022+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Adjustable Front Sway Bar End Links
Applications: Toyota GR Corolla
Torque Solution Front Sway Bar End Links for Toyota GR Corolla offer increased load capacity and can be used with stock or aftermarket sway bars. Also, due to the end links being adjustable you can eliminate preload on the sway bar, which can be caused by uneven suspension heights or settling. This is especially common with aftermarket suspension. We also chose to make these out of 7075 billet aluminum as we felt due to the length needed for these links this was the best suited option. You can rest assure these are the strongest links available for this application.
- CNC 7075 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Large Range Of Adjustability
- PTFE Lined Rod End w/ M12 Studs
- Limited Lifetime Warranty
Includes:
- Billet Aluminum Threaded Hex Adjuster Rod (2)
- PTFE Lined Zinc Rod End w/ M12-1.75 Stud (4)
- M12-1.75 Zinc Nyloc Flange Nut (4)
Fits:
- Toyota GR Corolla
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Adjustable Front Sway Bar End Links
Applications: VW / Audi PQ35, MQB, and MQB EVO
Torque Solution Front Sway Bar End Links offer increased load capacity and can be used with stock or aftermarket sway bars. Also, due to the end links being adjustable you can eliminate preload on the sway bar, which can be caused by uneven suspension heights or settling. This is especially common with aftermarket suspension. We also chose to make these out of 7075 billet aluminum as we felt due to the length needed for these links this was the best suited option. You can rest assure these are the strongest links available for this application.
- CNC 7075 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Large Range Of Adjustability (+/- 0.75 inches)
- PTFE Lined Rod End w/ M12 Studs
- Limited Lifetime Warranty
Includes:
- Billet Aluminum Threaded Hex Adjuster Rod (2)
- PTFE Lined Zinc Rod End w/ M12-1.75 Stud (4)
- M12-1.75 Zinc Nyloc Flange Nut (4)
Fits:
- Audi A3 2006-2013 8P 2.0 TDI
- Audi A3 2006-2013 8P 2.0 TSI
- Audi A3 2006-2013 8P 2.0T FSI
- Audi A3 2006-2008 8P 3.2L VR6 24V
- Audi A3 2015-2016 8V 1.8 TFSI- Audi A3 2015-2016 8V 2.0 TDI
- Audi A3 2015-2020 8V/8V.5 2.0 TFSI
- Audi A3 2022-Present 8Y 2.0 TFSI
- Audi Q2 2017-2021 MQB 2.0T
- Audi RS3 2011-2013 8P 2.5 TFSI
- Audi RS3 2015-2017 8V 2.5 TFSI
- Audi RS3 2017-2020 8V.5 2.5 TFSI EVO
- Audi RS3 2022-Present 8Y 2.5 TFSI EVO
- Audi RSQ3 2019-Present F3 2.5T
- Audi S3 2015-2020 8V/8V.5 2.0 TFSI
- Audi S3 2022-Present 8Y 2.0 TFSI
- Audi TT 2008-2015 8J 2.0 TSI
- Audi TT 2008-2015 8J 2.0T FSI
- Audi TT 2008-2015 8J 3.2L VR6 24V
- Audi TT 2016-2020 8S 2.0T Gen 3
- Audi TTS 2008-2015 8J 2.0T FSI
- Audi TTS 2016-2020 8S 2.0T Gen 3
- Audi TTRS 2012-2013 8J 2.5 TFSI
- Audi TTRS 2018-2020 8S 2.5 TFSI EVO
- Cupra (Seat) Formentor 2021-Present Mk1 2.0T
- Cupra (Seat) Formentor 2021-Present Mk1 2.5T
- Seat Ateca 2016-2021 Mk1 1.8T/2.0T
- Seat Leon 2006-Present Mk2/3/4 1.8T/2.0T
- Seat Tarraco 2019-2021 Mk1 2.0T
- Skoda Karoq 2017-Present Mk1 2.0T
- Skoda Kodiaq 2016-Present Mk1 2.0
- Skoda Octavia 2013-2020 Mk3 1.8T/2.0T
- Skoda Superb 2016-2020 B8 2.0T
- Skoda Yeti 2010-2018 Mk1
- VW E-Golf 2015-2020 Mk7/Mk7.5 E-Golf
- VW Eos 2006-2015 Mk5 2.0 TSI
- VW Eos 2006-2015 Mk5 2.0T FSI
- VW Eos 2006-2015 Mk5 3.2L VR6 24V
- VW GLI 2008.5 Mk5 2.0 TSI
- VW GLI 2005-2008 Mk5 2.0T FSI
- VW GLI 2011-2013 Mk6 2.0 TSI
- VW GLI 2014-2017 Mk6 2.0T Gen3 Non-MQB
- VW GLI 2018-Present Mk7 2.0 TSI Gen3
- VW Golf 2010-2014 Mk6 2.0 TDI
- VW Golf 2010-2014 Mk6 2.5L
- VW Golf 2015-2020 Mk7/MkV7.5 1.8T Gen3
- VW Golf 2015-2016 Mk7 2.0 TDI
- VW Golf R 2012-2013 Mk6 2.0T FSI
- VW Golf R 2015-2019 Mk7/Mk7.5 2.0 TSI Gen 3
- VW Golf R 2021-Present Mk8 2.0T Gen4
- VW GTI 2008.5-2009 Mk5 2.0 TSI
- VW GTI 2006-2008 Mk5 2.0T FSI
- VW GTI 2010-2014 Mk6 2.0 TSI
- VW GTI 2015-2021 Mk7/Mk7.5 2.0T Gen3
- VW GTI 2022-Present Mk8 2.0T Gen4
- VW Jetta 2005-2010 Mk5 2.0 TDI
- VW Jetta 2005-2010 Mk5 2.5L
- VW Jetta 2011-2017 Mk6 1.4 TSI
- VW Jetta 2013-2017 Mk6 1.8T Gen3
- VW Jetta 2011-2015 Mk6 2.0 TDI
- VW Jetta 2011-2015 Mk6 2.0L 8V
- VW Passat 2006-2010 B6 2.0 TSI
- VW Passat 2006-2010 B6 2.0T FSI
- VW Passat 2006-2010 B6 3.6L VR6 FSI
- VW Passat 2012-2019 B7 1.8T Gen3
- VW Passat 2012-2019 B7 2.0 TDI
- VW Passat 2012-2019 B7 2.5L
- VW Passat 2012-2019 B7 3.6L VR6 FSI
- VW R32 2008 Mk5 3.2L VR6 24V
- VW Rabbit 2006-2009 Mk5 2.5L
- VW Rabbit 2010-2014 Mk6 2.0 TDI
- VW Tiguan 2009-2011 Mk1 2.0 TDI
- VW Tiguan 2009-2011 Mk1 2.0 TSI
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Adjustable Rear Camber ArmsApplications: See Application List Torque Solution Adjustable Rear Camber Arms are designed to correct the rear suspension geometry on your lowered vehicle or dial in that perfect contact patch on your track car. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car for the optimal contact patch or get the full life of your tires these are a must have!! Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups. - Billet Aluminum - Weighs 2bs 14oz Per Arm - Black anodized / Torque Solution Laser engraved - High Quality Teflon Lined Spherical Bearings - Nickel Plated 4130 Chromoly Adjuster - 12.9 Grade Alloy Hardware - Sold As A Pair - Limited Lifetime Warranty **Important Note: We recommend professional installation and that an alignment is performed after installing this kit.
**Torque the M5 Allen Bolts to 150-inch lbs. After about 100 miles double check all bolts are still properly torqued.
***Spherical bearings are wear and tear items, which are not covered under warranty. Includes:- Billet Aluminum A Camber Arm Assembled (1) - Billet Aluminum B Camber Arm Assembled (1) - M12-1.75 X 70 Zinc Hex Bolt (4) - M12 Zinc Flat Washer (4) Fits:- Ford C-MAX 2013-2018
- Ford Focus 1999-2018
- Mazda 3 2004-2013
- Mazda 5 2006-2010
- Volvo C30 2004-2013
- Volvo S40 2004-2012
- Volvo V50 2004-2012
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Adjustable Rear Control Arms
Applications: Mitsubishi Evolution X 2008+
Torque Solution Adjustable Rear Control Arms Kit is designed to correct the rear suspension geometry on your lowered Evolution X 2008+. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car or get the full life of your tires these are a must have!!
2 links Total Included in Each Package. Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups.
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-FK Rod Ends
-Limited Lifetime Warranty
|
Torque Solution Rear Traction Arms
Applications: Toyota GR Supra MKV / BMW Z4 G29
Torque Solution Rear Traction Arms for Toyota GR Supra MKV / BMW Z4 G29 offer increased stability and suspension fine tuning. The traction arms help reduce wheel hop and bushing deflection under extreme loads. Made with high quality 6061-T6 billet aluminum, stainless steel clevis adjuster stud, FK PTFE lined rod ends and billet clamps w/ blue titanium hardware.
- CNC 6061-T6 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Adjustable
- FK Bearings PTFE Lined Rod Ends
- Limited Lifetime Warranty
Includes:
- Assembled Traction Arm (2)
Fits:
- Toyota GR Supra MKV 2020+ A90/A91
- BMW Z4 G29 2019+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Rear Toe Arms w/ Eccentric Lockouts
Applications: Toyota GR Supra MKV / BMW Z4 G29
Torque Solution Rear Toe Arms for Toyota GR Supra MKV / BMW Z4 G29 offer increased stability and suspension fine tuning. These arms are the perfect choice to help get your toe within spec or if you want to fine tune your contact patch for the drag strip. The toe arms also help reduce wheel hop and bushing deflection under extreme loads. Made with high quality 6061-T6 billet aluminum, PTFE lined rod ends and billet clamps w/ blue titanium hardware.
- CNC 6061-T6 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Adjustable
- PTFE Lined Rod Ends
- Includes Eccentric Lockout Kit w/ Hardware
- Limited Lifetime Warranty
Includes:
- Assembled Toe Arm (2)
- Eccentric Lockout (4)
- M12-1.75 x 80 Zinc Hex Bolt (2)
- M12-1.75 Stover Locking Flange Nut (2)
Fits:
- Toyota GR Supra MKV 2020+ A90/A91
- BMW Z4 G29 2019+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Adjustable Rear Control Arms
Applications: Mitsubishi Evolution 7/8/9
Torque Solution Adjustable Rear Control Arms are designed to correct the rear suspension geometry on your lowered Evolution 7/8/9. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car for the optimal contact patch or get the full life of your tires these are a must have!!
Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups.
- Made out of 7075 Billet Aluminum
- Weighs 3lbs 4oz Per Arm (3.25 lbs) (6.5lbs Per Set)
- Black anodized / Torque Solution Laser engraved
- 85A Durometer Urethane Bushings
- Nickel Plated 4130 Chromoly Adjuster
- High Quality Teflon Lined Spherical Bearing FK Rod Ends
- Stainless Steel Hardware
- Sold As A Pair
- Limited Lifetime Warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Adjustable Rear Control Arms
Applications: Mitsubishi Evolution 7/8/9
Torque Solution Adjustable Rear Control Arms are designed to correct the rear suspension geometry on your lowered Evolution 7/8/9. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car for the optimal contact patch or get the full life of your tires these are a must have!!
Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups.
- Made out of 7075 Billet Aluminum
- Weighs 3lbs 4oz Per Arm (3.25 lbs) (6.5lbs Per Set)
- Black anodized / Torque Solution Laser engraved
- 85A Durometer Urethane Bushings
- Nickel Plated 4130 Chromoly Adjuster
- High Quality Teflon Lined Spherical Bearing FK Rod Ends
- Stainless Steel Hardware
- Sold As A Pair
- Limited Lifetime Warranty
|
Torque Solution Adjustable Rear Lower Inner Control Arm Bushings
Applications: Subaru WRX/STI 2008+, BRZ/FR-S/86 2013+, Forester 2008+
Torque Solution adjustable polyurethane control arm bushings replace the soft OEM inner rubber material that over time deteriorates and fails. These will provide improved traction and reduced wheel hop without too much vibration, as they are made from 75a
durometer polyurethane and utilize stainless steel pins. This kit utilizes offset pins, which provide approx +/- 1 degree of camber. Confirmed to fit the OEM rear LCA's.
*ONLY 1 kit needed per car.
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- 75A durometer bushings
- Offset Stainless Steel Pins provide approx +/- 1 degree of camber
- Limited Lifetime Warranty
Fits:
- Subaru Impreza 2008-2014
- Subaru WRX 2008-2014
- Subaru STI 2008-2014
- Subaru WRX 2015+
- Subaru STI 2015+
- Subaru Forester 2008-2013
- Subaru Forester 2014+
- Subaru BRZ 2013+
- Scion FR-S 2013+
- Toyota 86 2013+
**Important Note: We recommend an alignment is performed after installing this kit.
|
Torque Solution Adjustable Rear Lower Inner Control Arm Bushings
Applications: Subaru WRX/STI 2008+, BRZ/FR-S/86 2013+, Forester 2008+
Torque Solution adjustable polyurethane control arm bushings replace the soft OEM inner rubber material that over time deteriorates and fails. These will provide improved traction and reduced wheel hop without too much vibration, as they are made from 75a
durometer polyurethane and utilize stainless steel pins. This kit utilizes offset pins, which provide approx +/- 1 degree of camber. Confirmed to fit the OEM rear LCA's.
*ONLY 1 kit needed per car.
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- 75A durometer bushings
- Offset Stainless Steel Pins provide approx +/- 1 degree of camber
- Limited Lifetime Warranty
Fits:
- Subaru Impreza 2008-2014
- Subaru WRX 2008-2014
- Subaru STI 2008-2014
- Subaru WRX 2015+
- Subaru STI 2015+
- Subaru Forester 2008-2013
- Subaru Forester 2014+
- Subaru BRZ 2013+
- Scion FR-S 2013+
- Toyota 86 2013+
**Important Note: We recommend an alignment is performed after installing this kit.
|
|
|
